Skip to main content

DIamond Flooring COMPANY

Address

4 Charles St, Dorchester, MA, USA

Work Time

Office Hour: 09:00am - 4:00pm

Call Us Today

(617) 653-9312

10 Mistakes That Ruin Hardwood Floors (And How to Avoid Them)

10 Mistakes
10 Mistakes

Hardwood floors are one of the best investments you can make in your home. They add beauty, increase property value, and can last for generations when properly maintained. Unfortunately, many homeowners unknowingly damage their floors through everyday habits that shorten their lifespan and lead to expensive repairs.

Here are the ten most common mistakes that damage hardwood floors—and how to avoid them.


1. Waiting Too Long to Refinish

Many homeowners don’t think about refinishing until the wood is badly scratched or discolored. By that point, damage may have reached the wood itself.

What to do instead:
Refinish your floors when the protective finish begins to wear away. Refinishing early helps prevent permanent damage and extends the life of your hardwood.


2. Using the Wrong Cleaning Products

Harsh chemicals, steam cleaners, vinegar, bleach, and ammonia can damage the protective finish and dull the wood over time.

Best practice:
Use a cleaner specifically designed for hardwood floors and a microfiber mop. Avoid excessive water.


3. Letting Water Sit on the Floor

Water is one of hardwood’s biggest enemies. Standing water can seep between boards, causing staining, swelling, cupping, or buckling.

Best practice:
Wipe up spills immediately and place waterproof mats near sinks, entryways, and pet bowls.


4. Dragging Heavy Furniture

Dragging furniture across hardwood floors can leave deep scratches and gouges that may require sanding to repair.

Best practice:
Always lift furniture instead of sliding it, and place quality felt pads under every furniture leg.


5. Skipping Felt Pads

Even lightweight chairs can scratch hardwood floors when moved repeatedly.

Best practice:
Replace worn felt pads every few months to keep your floors protected.


6. Wearing High Heels or Cleats Indoors

High heels concentrate weight into a very small area and can dent hardwood. Sports cleats and shoes with embedded gravel can also scratch the finish.

Best practice:
Remove outdoor shoes at the door and encourage family members and guests to wear socks or indoor slippers.


7. Letting Pet Nails Grow Too Long

Dogs and cats with long nails can leave visible scratches, especially on softer wood species.

Best practice:
Trim your pets’ nails regularly and keep paws clean after outdoor walks.


8. Ignoring Humidity Levels

Wood naturally expands and contracts with changes in humidity. Extremely dry conditions can create gaps between boards, while excess humidity can cause cupping or warping.

Best practice:
Maintain indoor humidity between 35% and 55% year-round.


9. Allowing Dirt and Sand to Build Up

Tiny particles of dirt act like sandpaper under your feet, gradually wearing away the finish.

Best practice:
Sweep or vacuum frequently using a hardwood-safe attachment, and place mats at all exterior entrances.


10. Choosing Replacement When Refinishing Would Do

Many homeowners assume scratched or dull floors need to be replaced, when professional refinishing can often restore them to like-new condition for much less.

Best practice:
Have your floors inspected by a hardwood flooring professional before deciding on replacement. If the wood is structurally sound, refinishing is often the smarter and more economical choice.


How to Keep Hardwood Floors Looking Beautiful

With proper care, hardwood floors can last for generations.

A few simple habits make a big difference:

  • Clean regularly with hardwood-safe products.
  • Wipe up spills immediately.
  • Use felt pads under furniture.
  • Keep pet nails trimmed.
  • Maintain proper indoor humidity.
  • Refinish floors before the finish wears completely through.
  • Schedule professional inspections if you notice deep scratches, discoloration, or water damage.

Trust the Professionals

Whether your floors need a simple refresh, repairs, or complete refinishing, professional craftsmanship helps protect your investment and ensures beautiful, long-lasting results.

Our experienced team specializes in hardwood floor sanding, refinishing, repairs, stain color changes, and new hardwood floor installation. We’ll evaluate your floors, explain your options, and recommend the best solution for your home and budget.

Ready to bring your hardwood floors back to life? Call us today at (617) 653-9312 for a free estimate and expert advice.

The Complete Guide to Hardwood Floor Refinishing: Everything Homeowners Need to Know

Refinishing Before Vs. After
Refinishing Before Vs. After

Hardwood floors are one of the most desirable features in any home. They add warmth, character, and value while offering exceptional durability that can last for generations. However, even the highest-quality hardwood floors eventually show signs of wear from daily foot traffic, pets, furniture, and sunlight.

The good news? In many cases, you don’t need to replace your hardwood floors. Professional refinishing can restore them to like-new condition for a fraction of the cost of replacement.

In this guide, we’ll explain when hardwood floors should be refinished, the benefits of refinishing, the process, costs, and how to keep your floors looking beautiful for years to come.


What Is Hardwood Floor Refinishing?

Hardwood floor refinishing is the process of removing the old finish by sanding the wood, repairing minor imperfections, applying stain (if desired), and sealing the floor with a durable protective finish.

Unlike replacement, refinishing preserves your existing hardwood while dramatically improving its appearance.

Most solid hardwood floors can be refinished multiple times during their lifetime.


Signs Your Hardwood Floors Need Refinishing

Many homeowners wait too long before refinishing their floors. Catching wear early can extend the life of your hardwood and reduce repair costs.

Common signs include:

  • Surface scratches
  • Dull or faded finish
  • Water spots
  • Pet stains
  • Minor dents
  • Small gouges
  • Sun fading
  • High-traffic wear patterns
  • Discoloration around entryways

If the wood underneath is still structurally sound, refinishing is often the best solution.


Benefits of Refinishing Hardwood Floors

1. Save Thousands Compared to Replacement

Replacing hardwood floors involves demolition, disposal, purchasing new flooring, installation, and finishing.

Refinishing allows you to restore your existing floors at a significantly lower cost.


2. Make Your Floors Look Brand New

Professional sanding removes years of scratches, stains, and wear.

Many homeowners are amazed that floors they thought needed replacement can look completely new after refinishing.


3. Increase Home Value

Beautiful hardwood floors remain one of the most attractive features for homebuyers.

Freshly refinished floors can improve your home’s appearance and increase resale value.


4. Change the Color

Want a modern look?

Refinishing allows you to completely change the stain color.

Popular choices include:

  • Natural White Oak
  • Classic Oak
  • Provincial
  • Special Walnut
  • Jacobean
  • Dark Walnut
  • Ebony
  • Matte Natural Finish

Whether you prefer light Scandinavian tones or rich contemporary colors, refinishing gives you endless design options.


Should You Choose Water-Based or Oil-Based Polyurethane?

Choosing the right finish is just as important as choosing the stain.

Water-Based Polyurethane

Benefits include:

  • Low odor
  • Fast drying
  • Crystal-clear appearance
  • Excellent durability
  • Minimal yellowing over time
  • Faster return to normal use

Best for families who want to move back into their home quickly.


Oil-Based Polyurethane

Benefits include:

  • Rich amber color
  • Traditional appearance
  • Excellent durability
  • Longer working time

Although oil-based finishes require a longer curing period, many homeowners love their warm, classic look.


How Long Does Hardwood Floor Refinishing Take?

Most projects are completed in 3 to 5 days, depending on:

  • Square footage
  • Repairs required
  • Number of coats
  • Drying conditions
  • Type of finish selected

Larger homes or floors requiring extensive repairs may take longer.


How Long Before You Can Walk on the Floors?

General guidelines:

Water-Based Finish

  • Socks: 4–6 hours
  • Shoes: 24 hours
  • Light furniture: 24–48 hours

Oil-Based Finish

  • Socks: 24 hours
  • Shoes: 48 hours
  • Furniture: 3–7 days

Following the recommended curing times helps ensure a long-lasting finish.


Can Pet Stains Be Removed?

Yes—in many cases.

Professional sanding often removes:

  • Dog stains
  • Cat stains
  • Surface water stains
  • Black discoloration (depending on depth)

If stains have penetrated deeply into the wood, replacing individual boards may be necessary before refinishing.


When Do Hardwood Floors Need Replacement Instead?

Sometimes refinishing isn’t enough.

Replacement may be recommended when floors have:

  • Severe water damage
  • Buckled boards
  • Extensive rot
  • Large gaps
  • Structural movement
  • Numerous cracked boards
  • Multiple previous refinishing jobs that have worn the wood too thin

A professional inspection can determine the most cost-effective solution.


Tips to Keep Hardwood Floors Beautiful

After refinishing:

  • Use felt pads under all furniture.
  • Sweep regularly to remove dirt and grit.
  • Clean spills immediately.
  • Maintain indoor humidity between 35% and 55%.
  • Avoid dragging heavy furniture.
  • Place rugs at entryways once the finish has fully cured.
  • Trim your pets’ nails regularly.

Simple maintenance can add years to the life of your floors.


Why Choose a Professional Hardwood Flooring Company?

While DIY refinishing kits are available, professional refinishing delivers better, longer-lasting results.

An experienced flooring contractor has the equipment and expertise to:

  • Produce a smooth, even finish
  • Minimize dust
  • Repair damaged boards
  • Apply premium finishes
  • Match stain colors accurately
  • Ensure proper curing for maximum durability

Professional workmanship helps protect your investment and keeps your floors looking beautiful for years to come.


Ready to Restore Your Hardwood Floors?

Whether your floors have scratches, water stains, pet damage, or years of wear, professional refinishing can dramatically transform your home.

Our experienced team specializes in hardwood floor sanding, refinishing, repairs, stain color changes, and new hardwood floor installation. We’ll evaluate your floors, explain your options, and recommend the solution that best fits your home and budget.

Contact us today at (617) 653-9312 for a free estimate and discover how beautiful your hardwood floors can look again.

Refinishing or Replacing Hardwood Floors: Which Option Is Right for You?

Refinishing Vs. Replacement
Refinishing Vs. Replacement

Hardwood floors are one of the most valuable and timeless features of a home. Unlike many other flooring materials, solid hardwood floors can last for decades—and even generations—because they can be sanded and refinished multiple times. While refinishing restores the beauty of worn floors, there are situations where replacement is the better long-term investment.

So, how do you know which option is right for your home?

Is It Cheaper to Refinish or Replace Hardwood Floors?

In most cases, refinishing hardwood floors is significantly more affordable than replacing them.

Replacing hardwood flooring involves several additional expenses, including:

  • Removing and disposing of the existing flooring
  • Purchasing new hardwood materials
  • Installing the new floor
  • Possible subfloor repairs or preparation

Refinishing, on the other hand, restores the existing wood by sanding away years of wear and applying a fresh stain and protective finish. The result is a floor that looks like new—at a fraction of the cost of replacement.

When Should You Refinish Hardwood Floors?

Refinishing is often the best choice if your hardwood floors are structurally sound but showing signs of normal wear.

Refinishing is recommended when:

  • Your floors have surface scratches, dents, scuffs, or minor gouges.
  • The finish has become dull or worn from years of foot traffic.
  • You want to update the color of your floors with a new stain.
  • You’d like to minimize the appearance of light pet stains or minor water discoloration.
  • You’ve repaired or replaced a section of flooring and need the entire floor refinished to create a seamless match.

With professional sanding and refinishing, most hardwood floors can be restored to look beautiful again.

When Should Hardwood Floors Be Replaced?

Although refinishing is possible in many situations, some floors are simply too damaged to restore.

Replacement may be necessary if your floors have:

  • Extensive water damage that has caused boards to swell, warp, or buckle.
  • Large gaps between planks due to structural movement or severe deterioration.
  • Numerous cracked, split, or broken boards throughout the floor.
  • Significant rot or mold damage.
  • Been sanded and refinished so many times that there is not enough wood remaining for another refinishing.

In these cases, replacing all or part of the flooring is often the safest and most cost-effective long-term solution.

Let a Professional Evaluate Your Floors

Every hardwood floor is unique. Before deciding whether to refinish or replace your flooring, it’s important to have it professionally evaluated.

At our company, we carefully inspect your floors, assess the extent of any damage, and explain all of your options. Our goal is to recommend the solution that provides the best value while preserving the beauty and longevity of your hardwood floors whenever possible.

If refinishing can restore your floors, we’ll help bring them back to life. If replacement is the better option, we’ll guide you through the process with honest recommendations and quality craftsmanship.

How Long Should You Wait Before Moving Back After Refinishing Hardwood Floors?

pic1
pic1

Refinishing hardwood floors can completely transform your home, but knowing when it’s safe to walk on the floors, move furniture back, or let pets return is just as important as choosing the right finish. Moving too quickly can leave permanent scratches, dents, or marks in a finish that hasn’t fully cured.

The timeline depends largely on whether your floors were finished with water-based polyurethane or oil-based polyurethane.

Water-Based vs. Oil-Based Polyurethane

Water-based polyurethane cures much faster than oil-based polyurethane, making it a popular choice for homeowners who want to minimize downtime.

ActivityWater-Based PolyurethaneOil-Based Polyurethane
Walk in socks4–6 hours24 hours
Walk with shoes24 hours48 hours
Move light furniture24–48 hours3–4 days
Move heavy furnitureAbout 4 daysAbout 7 days
Replace area rugs1–2 weeks30 days
Full cure3–5 daysUp to 30 days

Although water-based polyurethane feels dry much sooner, it still continues curing for several days. Oil-based polyurethane takes significantly longer because it hardens through a slower chemical curing process.

When Can You Walk on Newly Refinished Floors?

One of the most common questions homeowners ask is when they can safely walk on their new floors.

Water-Based Polyurethane

  • Walk in clean socks after 4 to 6 hours.
  • Wait 24 hours before wearing shoes.

Oil-Based Polyurethane

  • Avoid walking on the floor for at least 12 to 24 hours.
  • Walk only in socks after 24 hours.
  • Wait 48 hours before wearing shoes.

Walking Tips

  • Wear clean socks only. Bare feet can leave oils on the finish, while shoes can dent or scuff the surface.
  • Walk gently and avoid twisting or pivoting.
  • Before stepping on the floor, test an inconspicuous corner to make sure the finish is no longer tacky.

When Can Furniture Be Moved Back?

Even if the floors appear dry, the finish underneath may still be soft enough to dent.

Water-Based Polyurethane

  • Light furniture: 24–48 hours
  • Heavy furniture: Approximately 4 days

Oil-Based Polyurethane

  • Light furniture: Minimum 72 hours
  • Heavy furniture: About 7 days

Best Practices for Moving Furniture

  • Always lift furniture—never drag it.
  • Install new, thick felt pads on every furniture leg before placing it on the floor.
  • Move slowly and carefully to avoid damaging the finish.

When Should Area Rugs Go Back?

Area rugs trap heat and moisture, preventing the finish from curing properly.

  • Water-based polyurethane: Wait 1 to 2 weeks.
  • Oil-based polyurethane: Wait 30 days.

Allowing the finish to breathe during the curing process helps ensure maximum durability.

When Can Pets Return?

Pets can unintentionally damage newly refinished floors with their claws, and oil-based finishes also produce fumes that may be harmful to animals.

Water-Based Polyurethane

  • Keep pets off the floor for 48 hours.
  • Cats and smaller pets can usually return after 3 days.
  • Large dogs should wait approximately 7 days.

Oil-Based Polyurethane

  • Keep all pets away for at least 4 days.
  • Large dogs should wait 7 to 10 days.
  • During the first 48 hours, keep pets out of the home entirely if oil-based polyurethane was used due to strong solvent fumes.

Pet Safety Tips

  • Trim and file your pet’s nails before allowing them back onto the floors.
  • If necessary, use protective dog booties.
  • Use clean, breathable cotton sheets as temporary walkways if pets must cross the room.
  • Never cover newly refinished floors with plastic, which traps moisture and interferes with curing.

Final Thoughts

Patience is one of the best investments you can make after refinishing hardwood floors. While water-based polyurethane allows homeowners to return to normal much sooner, both finishes require time to develop their full strength.

Following the recommended timelines—and avoiding shortcuts—will help protect your investment and keep your hardwood floors looking beautiful for years to come.

Quick Reference

Water-Based Polyurethane

  • Socks: 4–6 hours
  • Shoes: 24 hours
  • Light furniture: 24–48 hours
  • Heavy furniture: 4 days
  • Rugs: 1–2 weeks
  • Pets: 2–7 days
  • Full cure: 3–5 days

Oil-Based Polyurethane

  • Socks: 24 hours
  • Shoes: 48 hours
  • Light furniture: 3–4 days
  • Heavy furniture: 7 days
  • Rugs: 30 days
  • Pets: 4–10 days
  • Full cure: Up to 30 days

How Much Does It Cost to Refinish Harwood Floors in 2026?

The cost of refinishing depends on the current condition of the flooring. To fully refinish a hardwood floor, including sanding down the top layer to bare wood and applying several new finishing coats, you can expect to pay flooring professionals an average of $5 per square foot. However, Diamond Flooring is proud to offer a much more competitive and straightforward pricing structure. By going with us, you can rest assured you will save as much as 30% to 40% compared to other flooring companies in the area.  We also have multiple seasonal discounts and offers to help homeowner save even more on their projects.

Sample costs to refinish hardwood floor at Diamond Flooring compared to other companies in Massachusetts (average job size of 700 SF or more.)

 Massachusetts Average CostDiamond Flooring Average Cost
Refinishing using oil-based polyurethane$4.00-$9.00$1.75-$3.00
Refinishing using water-based polyurethane $5.00-$10.00$2.50-$3.50
Staining$2.00-$3.00$1.00-$1.50

If your floor appears slightly worn but otherwise in good condition, you could get by on resurfacing the floor without a full sanding. This is typically a low cost of $0.75 to $1.50 per square foot. Moreover, we also offers to remove old floor, fix sub-wood floor, skimming coat and other repairs at reasonable rates.

Please call us at (617) 653-9312 to find out how much you would save today

Hardwood Floor Installation Cost Guide

How Much Does It Cost to Install New Hardwood Floors in Massachusetts?

Nailed down hardwood wood floor is more expensive up-front than engineered floor, bamboo floor or vinyl floor, but can be refinished several times for a lifetime of use.

Depending on your selections, the total cost for hardwood floor installation may vary. At Diamond Flooring, the average labor cost to install new nailed down hardwood is approximately $2-$3/SF for an average job size. However, depending on factors such as the condition of your subfloor, the required installation style, the complexity of the project, this average baseline rate may change reasonably. Please see the chart below to learn more about how much you save for choosing to work with us.

Sample costs to install nailed down prefinished hardwood floor at Diamond Flooring compared to other companies in Massachusetts (average job size of 700 SF or more).

 Massachusetts Average CostDiamond Flooring Average Cost
Materials$6.00-$10.00$4.00-$8.00 (due to accurate measurements, less waste, and customer’s direct purchase from suppliers)
Labor$4.00-$10.00$2.00-$3.00 (depending on scopes and job size)

Notes: Diamond Flooring also offers to remove old floor, fix sub-wood floor, glue down hardwood floor and other repairs at reasonable rates.

Please call us at (617) 653-9312 to find out how much you would save today!

Should You Paint or Install Floors First?

Picture6

Should you paint or install floors first? If you are renovating your home, you will need to decide which comes first: painting or installing new floors. Most people think that painting should be done first to prevent any spills from marring brand-new flooring. However, experts agree that new flooring should always be installed and/or refinishing before you have any interior painting done.

Why Is it Better to Install Flooring Before Painting?

It’s a natural assumption that painting should take place before installing flooring. However, the opposite is true, and we’re going to tell you why.

There are several tasks that must be undertaken before laying new flooring in a room. Many of these jobs can cause damage to walls, meaning repairs are necessary.

Among the steps you’ll need to follow before installing flooring include:

1. Removing the old flooring or carpet

Tearing up old carpet or flooring is a very messy job. When removing the old flooring, you’ll likely unearth a vast amount of debris, dust, and dirt. If you choose to paint first, these particles can land in your fresh coat of paint, marring the finish.

When the flooring is newly installed; often, some damage to the walls can occur. This can leave your newly painted walls with unsightly marks and blemishes. When this happens, you’ll need to repair your walls and apply touch-up paint. These additional steps cost you both time and money, making it clear why flooring before painting is the best idea.

2. Replacing or repainting trim

Depending on the type of flooring you’ve purchased, removing your baseboards and trim is usually necessary. Once you’ve removed these items, they may require repainting and some repair. When the trim has been reattached to the walls, the nail holes will need to be filled and touchup painting is done. 

By choosing to install flooring before painting, you give yourself the opportunity to do all of your painting in one shot. This is much more efficient and cuts down on the amount of mess involved in the project.

Some trim and baseboards will need to be installed slightly higher than what was previously in place. If you’ve decided to do your painting first, you may find yourself with an area that still bears the old paint. This would mean a second application of paint is necessary to ensure the entire surface is covered.

3. Preparing the walls before installing flooring

Depending on what the condition of the walls are, it is a good idea to do all preparatory work before the flooring is installed. This includes any patching, sanding, or wallpaper removal that can be messy and leave behind dirt or debris. 

4. Masking

Once the new flooring has been installed, you’ll be able to protect the surface through the use of painter’s special tape and drop cloths. These two items are valuable tools that keep mess to a minimum and protect your floors.

Most professionals consider painting to be finish work. As a result, they prefer leaving it until the end of the job. With the right precautions in place, installing flooring before painting poses no risk of damage.

Does the Type of Flooring Make a Difference?

Different precautions must be taken for each type of flooring installed in your home. However, this does not change the fact that when it comes to painting first or flooring first, flooring takes the top position.

Though some types of flooring such as finished hardwood can simply be installed as-is, unfinished hardwood will need to be stained then sanded. Stain can easily splash on walls, ruining a fresh coat of paint. If the correct amount of drying time has not been allotted, dust and wood shavings can get into the paint on your walls, ruining the finish.

If your home renovation project includes refinishing existing hardwood floors, it becomes that much more important that your flooring takes top priority over overpainting. Refinishing hardwood involves a lot of sanding and buffing, two jobs that make a lot of mess.

Should You Install Cabinets or Floors First? Watch this Video!

OIL BASED VS. WATER BASED POLYURETHANE

Picture4

Another one of the most frequently asked questions we get from our customers is, “What is the difference between water based and oil based poly?” Both oil and water based polyurethanes are like a coat of armor for the hardwood floor below, protecting the wood from damage.   Each type of polyurethane is a sacrificial layer that will show scratches and wear marks over time, and both oil and water

based polyurethane have their strengths! DURABILITY: If each product is applied properly using quality products, the difference in durability is indiscernible. A lot of clients think that water based poly is not as durable as an oil based poly, but a newer brand, quality water based poly will last just as long if it is well taken care of! For water based polys, we recommend and use only Bona products, as we feel they are the highest quality water based polys on the market.

COLOR: Oil based poly has an amber hue, whereas water based poly is clear. An oil based polyurethane will continue to amber and darken over time, while water based poly will remain clear for the lifetime of the hardwood floor. This color difference is less noticeable over a stained hardwood floor, but an oil based poly will still exhibit an amber hue that will continue to darken over time.

DRYING TIMES: Oil based poly takes much longer to dry and cure, and only one coat of oil based poly can be applied to a hardwood floor in 24 hours. Water based poly dries much faster, and several coats can be applied in one day. Water based poly can be walked on with socks in about 4-6 hours after last coat has been applied, while oil based poly must dry for at least 24 hours before walking on it with socks.

SMELL: Oil based poly has a very pungent smell and emits a strong chemical odor and noxious fumes while drying that should not be inhaled. Applying oil based poly requires the use of a respirator and your clothes will stink for hours afterwards! We normally advise our clients to be out of the house and also to remove their pets while oil based poly is being applied and drying. Water based poly, on the other hand, has almost no smell. Water based polyurethane is safe to apply without a respirator, and will not stink up the house like an oil based poly. It is safe for people and pets to occupy a house while undergoing coatings of water based poly.

THICKNESS AND HARDNESS: Oil based poly is a thicker poly, but it is also softer. Water based poly, an acrylic product, is a thinner, but harder coating. Oil poly can be more susceptible to dents, while water based poly can be more susceptible to surface scratching. Because water based is a thinner product, we

recommend 3 coats of water based poly as a minimum, whereas with oil 2 coats are sufficient as a minimum. For people with large pets, we recommend either 3 coats of an oil based poly or 3 coats of Bona Traffic High Durability water based poly.

COST: Water based poly is a more expensive product. Expect to pay .50 – $1.50/sf more for a water based polyurethane finish. If your flooring contractor is not charging you more for a water based polyurethane, they are using a cheap brand that will not last! As previously stated, we use only Bona brand water based polyurethanes, as they are the most durable on the market.

FEEL:   Both finish should feel smooth equally.

INSTANCES THAT REQUIRE WATER BASED POLY: If you are going for a gray stained, white stained or a white-washed hardwood floor, you must use a water based poly, because an oil based poly will make those floors look yellow. Over time, they will continue to look more and more yellow-ish. ICK!! Also certain very light species of wood, such as Maple, look best with a water based poly for the same reasons. Beautiful light-colored Maple turns yellow with application of an oil based poly. We also recommend a water based poly for hardwoods that have a very

yellow-ish tone to them naturally, such as Ash, Pine, or Fir, because application of an oil based poly only brings out the yellow tones even more! This is a matter of taste, however, all of our clients with the aforementioned hardwood species have been very happy with the application of a clear water based poly. I have seen Ash, Pine and Fir floors with oil based poly applied and they just scream YELLLLOOOWWWW (even more so over time)!!!

Can you tell the differences between Red Oak and White Oak?

125846640 3621035221286053 5342517941317705726 n

❓Can you tell the differences between Red Oak and White Oak?
Here are the 4 key factors:

🎨Color Difference: Red oak has a subtle pink undertone and white oak has a browner and often yellow tint. And when you stain each, the color difference can be noticeable.

♒️Graining: Red oak has a much stronger graining than white oak.

🥊Hardness Level: White oak flooring is slightly harder than red oak.

💰Price: White oak’s price is slightly higher.